Compression Routers
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Our tools are not imported. We pride ourselves on making and customising all our own tools here in New Zealand.
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: These high quality tubular mills are ideal for cutting and cleaning cones, tapes and tubular milling of numerous steels.
DESIGN FEATURES: Low vibration, long reach for cavity milling.
Specially designed front radius and teeth – very stable
High metal removal rate, high table feeds possible, user friendly.
Application rom soft to hardened steel, titanium and stainless steel
* We can regrind these!
DESIGN FEATURES: Unique four-facet point
2 Flutes
DESIGN FEATURES: Unique four-facet point
2 Flutes
DESIGN FEATURES: For generating radius on work piece
Suitable for harder materials, Titanium cutting
* On request: Out of Range / Other sizes
TiALN Coated for steels
DESIGN FEATURES: Right hand cutting, Left hand helix, H6 tolerange
Design for reaming in steel, non-ferrous materials & cast iron
* On request: Out of Range / Other sizes and coated product
DESIGN FEATURES: Unique four-facet point
2 Flutes
DESIGN FEATURES: Helix angle 30º to promote rapid chip evacuation
Rolled point. Strong tapered flute core.
140º Point angle. Tap drill sizes.
Advanced material and geometry.
Designed for deep hole drilling
DESIGN FEATURES: High volume material removal in difficult to machine materials.
Reduces vibration and noise. Works well on harder materials.
Corner radius extends tool life with reduced tooth load.
Improved chip evacuation
* Also available: Chamfer corner, long series
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 32º & 38º (special geometry with 2 different helixes)
Extremely smooth running, chatter reducing, long running.
Centre cutting. Good for production. Perfect for tool steels.
0.5mm x 45º chamfer on front
DESIGN FEATURES: Chamfering angle 90º
Designed for chamfering applications
*60º inclusive and other diameters on request
* On request: Out of Range / Other sizes and uncoated
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Taper to 60MM End Mills, 4 Flute also available on request
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Chamfering angle 90º
Designed for chamfering applications
*60º inclusive and other diameters on request
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
For stronger corners and part radius
DESIGN FEATURES: Helix angle 30º to promote rapid chip evacuation
Rolled point. 140º Point angle, strong tapered flute core.
Short length. Tap drill sizes.
Advanced material and geometry.
More rigid design for improved drill accuracy
DESIGN: Helix angle 45º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
For stronger corners and part radius
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 45º helix for harder material
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 45º helix for harder material
These dynamically balanced tools provide an exceptional surface to insure part rigidity in MDF, LDF, and Balsa core spoilboard material. In addition to spoilboard finishing, the carbide tipped style can be used to plane to size, slot, and bottom finish in a variety of flat sheet plastic . Regardless of the application, the entire process is accomplished with maximum productivity and outstanding finish quality.
Router Bit 2 Flute Routing and Folding Tool Cutter 20.00mm Standard Series
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Chamfering angle 90º
Designed for chamfering applications
*60º inclusive and other diameters on request
* On request: Out of Range / Other sizes and uncoated
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Centering tool can be used for centering applications in most steels
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Unique four-facet point
2 Flutes
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Unique four-facet point
2 Flutes
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º to promote rapid chip evacuation
Rolled point. 140º Point angle, strong tapered flute core.
Short length. Tap drill sizes.
Advanced material and geometry.
More rigid design for improved drill accuracy
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º to promote rapid chip evacuation
Rolled point. 140º Point angle, strong tapered flute core.
Short length. Tap drill sizes.
Advanced material and geometry.
More rigid design for improved drill accuracy
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: 5º Left hand helix, Right hand cutting
Suitable for most composite materials. Excellent for cutting thinner materials.
Handles higher feeds well.
* On request: Out of Range / Other sizes and uncoated product
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
Suitable for general purpose milling of most materials, steels, non-ferrous materials
* On request: Out of Range / Other sizes and uncoated product
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
Suitable for general purpose milling of most materials, steels, non-ferrous materials
* On request: Out of Range / Other sizes and uncoated product
End Mill 4 Flute Alu Cut Aluminium Medium Ripper Standard Series
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Suitable for general purpose milling of most materials, steels, non-ferrous materials
* On request: Out of Range / Other sizes and uncoated product
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Suitable for general purpose milling of most materials, steels, non-ferrous materials
* On request: Out of Range / Other sizes and uncoated product
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Designed to produce chamfer when trimming
* On request: Out of Range / Other sizes
TiALN Coated for steels
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
Suitable for general purpose milling of most materials, steels, non-ferrous materials
* On request: Out of Range / Other sizes and uncoated product
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 30º, Right hand cutting, Centre cutting
Available in 40º helix for harder material
Suitable for general purpose milling of most materials, steels, non-ferrous materials
* On request: Out of Range / Other sizes and uncoated product
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: The straight flute is preferred where the workpiece is fairly rigid.
Excellent for routing harder materials that require a fine finish
4 Flutes offers faster cutting.
Helps to hold perpendicularily 2 & 4 straight flutes. Smooth Running.
Designed to mill abrasive glass filled plastic with reinforcing fibre & other additives.
Ideally suited to cut: ABS, MDF, Acrylic, Fibreglass, Nylon phenolic & PVC
Widely used on materials suh as Plexiglass and Perspex.
* On request: Out of Range / Other sizes
TiALN Coated for steels
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: The straight flute is preferred where the workpiece is fairly rigid.
2 Flutes provide maximum swarf evacuation
Widely used on materials suh as Plexiglass and Perspex.
* On request: Out of Range / Other sizes
TiALN Coated for steels
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Helix angle 38º, Centre cutting, Righ hand cutting.
Fast chip evacuation, great stock removal, great finish.
Medium profile. High velocity milling
Designed for softer material machining, primarily aluminium and non-ferrous metals
* On request: Out of Range / Other sizes
TiALN Coated for steels
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Tapered angle 60º or 90º inclusive
Especially design for superior performance when engraving a variety of materials
* On request: Out of Range / Other sizes
TiALN Coated for steels
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Tapered angle 60º or 90º
* On request: Out of range sizes, angles, point sizes. Coated also available
MICRO GRAIN SOLID CARBIDE
DESIGN FEATURES: Tapered angle 60º or 90º
* On request: Out of range sizes, angles, point sizes. Coated also available
MICRO GRAIN SOLID CARBIDE
Slow helix router
DESIGN FEATURES: Designed with incrase clearance angles.
Extremely sharp cutting edge to give improved performance on plastics and MDF
Slow helix offers good surface finish without lifting the material.
Good swarf evacuation
Especially designed for milling Aluminium alloys and most non-ferrous and composite materials.
* On request: Out of Range / Other sizes
TiALN Coated for steels
End Mill 2 Flute Comp Cut Standard Series
MICRO GRAIN SOLID CARBIDE
For plastic, graphite & wood
DESIGN FEATURES: Perfectly balance, high speed, high feed.
All-in-one stock removal and finishing tool.
Has polishing -wiper facet for improved finish.
Especially design for milling, excellent tool for soft, flexible materials
* On request: Out of Range / Other sizes
TiALN Coated for steels
MICRO GRAIN SOLID CARBIDE
For Aluminium
DESIGN FEATURES: Quick Stock removal Tool
20º Helix, Flat geometry for quicker stock removal
MICRO GRAIN SOLID CARBIDE
For Aluminium
MICRO GRAIN SOLID CARBIDE
For Aluminium
MICRO GRAIN SOLID CARBIDE
For Aluminium
MICRO GRAIN SOLID CARBIDE
For Aluminium
MICRO GRAIN SOLID CARBIDE
For plastic, graphite & wood
DESIGN FEATURES: 15º Helix, upward spiral. Resists chip welding
Creates smooth finish in soft & hard plastics.
Polished flute for easy chip evacuation
MICRO GRAIN SOLID CARBIDE
For plastic, graphite & wood
DESIGN FEATURES: Creates smooth, polished finish
Polished flute for easy chip evacuation
Resists chip welding
* On request: Out of Range / Other sizes
TiALN Coated for steels
ALU CUT End Mill Router Bit Aluminium Single Flute
Carbide Tools Ltd Specialise in design, manufacture and regrinding of all Tungsten Carbide and High Speed Steel Cutting Tools.
Our factory is equipped with the latest and finest CNC grinding enquipment and is staffed by professionals with a reputation for producing work of the very highest quality and technical standards.
To provide a cost effective, world class, turnkey Tool and Cutter Manufacturing and Regrinding service to it’s customers.
To create life-long relationships with clients and suppliers to strengthen the New Zealand industry so as to become a world class player in our field.
The Company aims to become a global leader in the design and manufacture of superior cutting tools.
To supply the diverse and (ever growing) New Zealand market with accurate and reliable products to meet every requirement and so ensuring continual customer satisfaction.