WHAT OUR CLIENTS SAY

Josh (CNC Machinist / Tool Maker) – Manufacturing Systems

I would like to pass on a BIG thanks to Paul and Vanessa at Carbide Tools. I recently had the challenge of modifying a large set of production dies that are located abroad from our office in New Zealand. I made a drawing of a profile cutter that would allow the machine shop abroad to make the modification to each die in just two cuts using a manual mill. When I presented the idea to Paul and Vanessa they were only too happy to help me out. Within no time Paul had worked out how to make the profile cutter work with the depth of cut and swarf clearance needed to make this work smoothly. I put the cutter through it’s paces in NZ before sending it abroad, who got the same excellent results-nice clean cut with a smooth finish and the chip clearance worked well. Regards Josh

Justin – Core Builders Composite Limited

Hi Paul and Vanessa We as Core Builders Composites Ltd would just like to extend our gratitude and thanks for an absolute professional and can do attitude when it has come to our needs.  In the world of America’s Cup and even just super yacht manufacture we  are constantly dealing with new and ever changing materials. You guys have gone out of your way to work with us when it comes to getting custom tooling made up for our very custom needs. Best Regards Justin

Antonio Danieli (Director) – DCS Engineering NZ Ltd

I recently had a job to do where I was cutting 304 stainless Steel. For this particular job I decided to use a tool manufacture by Carbide Tools Ltd. I used a 6mm 4 Flute R0.5 “Quick Feed” Tungsten Carbide taking a .5mm depth of cut. I was able to reduce my machining time from 13 minutes per component to 3.5 minutes increasing my productivity by 73% leaving an exceptional finish on the final machined product.

Brandon – Rheem New Zealand Limited

Morning Vanessa, Very happy with the cutter I received from you guys,  good quality and great service!  Regards, Brandon

Simon – Sistema Plastics Limited

Hi Paul, Just getting back to you about those custom designed cutters you made for us. Very happy with your work, the cutters worked out fine no issues at all. Cheers Simon (Toolroom Forman)

Customer satisfaction is key…
“We do not accept ‘Close’ only Perfect”